From: Oleg Broytman <phd@phdru.name>
Date: Wed, 24 Feb 2016 10:41:22 +0000 (+0300)
Subject: Add .curlrc, .gdbinit, .wgetrc
X-Git-Url: https://git.phdru.name/?a=commitdiff_plain;h=8583cdc67b66dad90cfda3dda317b818313ec922;p=dotfiles.git

Add .curlrc, .gdbinit, .wgetrc
---

diff --git a/.curlrc b/.curlrc
new file mode 100644
index 0000000..9c20696
--- /dev/null
+++ b/.curlrc
@@ -0,0 +1,24 @@
+# cURL default configuration file
+# http://curl.haxx.se/docs/manpage.html
+
+# Limit the time (in seconds) the connection to the server is allowed to take
+connect-timeout = 30
+
+# Follow HTTP redirects
+location
+
+# Show progress using a progress meter
+progress-bar
+
+# When following a redirect, automatically set the previous URL as referer
+referer = ";auto"
+
+# Show error messages
+show-error
+
+# Send a fake UA string for the HTTP servers that sniff it
+# Disguise as Firefox on NT
+user-agent = Mozilla/5.0 (Windows NT 5.1; rv:10.0.2) Gecko/20100101 Firefox/10.0.2
+
+# Default to -O
+--remote-name-all
diff --git a/.gdbinit b/.gdbinit
new file mode 100644
index 0000000..c552dcb
--- /dev/null
+++ b/.gdbinit
@@ -0,0 +1,2 @@
+set history expansion on
+set history save on
diff --git a/.wgetrc b/.wgetrc
new file mode 100644
index 0000000..46ee18f
--- /dev/null
+++ b/.wgetrc
@@ -0,0 +1,597 @@
+# https://www.gnu.org/software/wget/manual/wget.html#Startup-File
+
+# accept/reject = string
+
+### Same as '-A'/'-R' (see Types of Files <#Types-of-Files>).
+
+# add_hostdir = on/off
+
+### Enable/disable host-prefixed file names. '-nH' disables it.
+
+# ask_password = on/off
+
+### Prompt for a password for each connection established. Cannot be
+### specified when '--password' is being used, because they are mutually
+### exclusive. Equivalent to '--ask-password'.
+
+# auth_no_challenge = on/off
+
+### If this option is given, Wget will send Basic HTTP authentication
+### information (plaintext username and password) for all requests. See
+### '--auth-no-challenge'.
+
+# background = on/off
+
+### Enable/disable going to background-the same as '-b' (which enables it).
+
+# backup_converted = on/off
+
+### Enable/disable saving pre-converted files with the suffix
+### '.orig'-the same as '-K' (which enables it).
+
+# backups = number
+
+### Use up to number backups for a file. Backups are rotated by adding
+### an incremental counter that starts at '1'. The default is '0'.
+
+# base = string
+
+### Consider relative URLs in input files (specified via the 'input'
+### command or the '--input-file'/'-i' option, together with
+### 'force_html' or '--force-html') as being relative to string-the same
+### as '--base=string'.
+
+# bind_address = address
+
+### Bind to address, like the '--bind-address=address'.
+
+# ca_certificate = file
+
+### Set the certificate authority bundle file to file. The same as
+### '--ca-certificate=file'.
+
+# ca_directory = directory
+
+### Set the directory used for certificate authorities. The same as
+### '--ca-directory=directory'.
+
+# cache = on/off
+
+### When set to off, disallow server-caching. See the '--no-cache' option.
+
+# certificate = file
+
+### Set the client certificate file name to file. The same as
+### '--certificate=file'.
+
+# certificate_type = string
+
+### Specify the type of the client certificate, legal values being 'PEM'
+### (the default) and 'DER' (aka ASN1). The same as
+### '--certificate-type=string'.
+
+# check_certificate = on/off
+
+### If this is set to off, the server certificate is not checked against
+### the specified client authorities. The default is "on". The same as
+### '--check-certificate'.
+
+# connect_timeout = n
+
+### Set the connect timeout-the same as '--connect-timeout'.
+
+# content_disposition = on/off
+
+### Turn on recognition of the (non-standard) 'Content-Disposition' HTTP
+### header-if set to 'on', the same as '--content-disposition'.
+
+# trust_server_names = on/off
+trust_server_names = on
+
+### If set to on, use the last component of a redirection URL for the
+### local file name.
+
+# continue = on/off
+continue = on
+
+### If set to on, force continuation of preexistent partially retrieved
+### files. See '-c' before setting it.
+
+# convert_links = on/off
+convert_links = on
+
+### Convert non-relative links locally. The same as '-k'.
+
+# cookies = on/off
+
+### When set to off, disallow cookies. See the '--cookies' option.
+
+# cut_dirs = n
+
+### Ignore n remote directory components. Equivalent to '--cut-dirs=n'.
+
+# debug = on/off
+
+### Debug mode, same as '-d'.
+
+# default_page = string
+
+### Default page name-the same as '--default-page=string'.
+
+# delete_after = on/off
+
+### Delete after download-the same as '--delete-after'.
+
+# dir_prefix = string
+
+### Top of directory tree-the same as '-P string'.
+
+# dirstruct = on/off
+
+### Turning dirstruct on or off-the same as '-x' or '-nd', respectively.
+
+# dns_cache = on/off
+
+### Turn DNS caching on/off. Since DNS caching is on by default, this
+### option is normally used to turn it off and is equivalent to
+### '--no-dns-cache'.
+
+# dns_timeout = n
+
+### Set the DNS timeout-the same as '--dns-timeout'.
+
+# domains = string
+
+### Same as '-D' (see Spanning Hosts <#Spanning-Hosts>).
+
+# dot_bytes = n
+
+### Specify the number of bytes "contained" in a dot, as seen throughout
+### the retrieval (1024 by default). You can postfix the value with 'k'
+### or 'm', representing kilobytes and megabytes, respectively. With dot
+### settings you can tailor the dot retrieval to suit your needs, or you
+### can use the predefined /styles/ (see Download Options
+### <#Download-Options>).
+
+# dot_spacing = n
+
+### Specify the number of dots in a single cluster (10 by default).
+
+# dots_in_line = n
+
+### Specify the number of dots that will be printed in each line
+### throughout the retrieval (50 by default).
+
+# egd_file = file
+
+### Use string as the EGD socket file name. The same as '--egd-file=file'.
+
+# exclude_directories = string
+
+### Specify a comma-separated list of directories you wish to exclude
+### from download-the same as '-X string' (see Directory-Based Limits
+### <#Directory_002dBased-Limits>).
+
+# exclude_domains = string
+
+### Same as '--exclude-domains=string' (see Spanning Hosts
+### <#Spanning-Hosts>).
+
+# follow_ftp = on/off
+
+### Follow FTP links from HTML documents-the same as '--follow-ftp'.
+
+# follow_tags = string
+
+### Only follow certain HTML tags when doing a recursive retrieval, just
+### like '--follow-tags=string'.
+
+# force_html = on/off
+
+### If set to on, force the input filename to be regarded as an HTML
+### document-the same as '-F'.
+
+# ftp_password = string
+
+### Set your FTP password to string. Without this setting, the password
+### defaults to '-wget@', which is a useful default for anonymous FTP
+### access.
+
+### This command used to be named |passwd| prior to Wget 1.10.
+
+# ftp_proxy = string
+
+### Use string as FTP proxy, instead of the one specified in environment.
+
+# ftp_user = string
+
+### Set FTP user to string.
+
+### This command used to be named |login| prior to Wget 1.10.
+
+# glob = on/off
+
+### Turn globbing on/off-the same as '--glob' and '--no-glob'.
+
+# header = string
+
+header = Accept: text/html,application/xhtml+xml,application/xml;q=0.8,*/*;q=0.5
+header = Accept-Language: ru-ru,ru;q=0.8;en-us;q=0.6,en;q=0.4
+header = Connection: keep-alive
+
+### Define headers for HTTP downloads, like using '--header=string'.
+
+# adjust_extension = on/off
+
+### Add a '.html' extension to 'text/html' or 'application/xhtml+xml'
+### files that lack one, or a '.css' extension to 'text/css' files that
+### lack one, like '-E'. Previously named 'html_extension' (still
+### acceptable, but deprecated).
+
+# http_keep_alive = on/off
+
+### Turn the keep-alive feature on or off (defaults to on). Turning it
+### off is equivalent to '--no-http-keep-alive'.
+
+# http_password = string
+
+### Set HTTP password, equivalent to '--http-password=string'.
+
+# http_proxy = string
+
+### Use string as HTTP proxy, instead of the one specified in environment.
+
+# http_user = string
+
+### Set HTTP user to string, equivalent to '--http-user=string'.
+
+# https_only = on/off
+
+### When in recursive mode, only HTTPS links are followed (defaults to
+### off).
+
+# https_proxy = string
+
+### Use string as HTTPS proxy, instead of the one specified in environment.
+
+# ignore_case = on/off
+
+### When set to on, match files and directories case insensitively; the
+### same as '--ignore-case'.
+
+# ignore_length = on/off
+
+### When set to on, ignore |Content-Length| header; the same as
+### '--ignore-length'.
+
+# ignore_tags = string
+
+### Ignore certain HTML tags when doing a recursive retrieval, like
+### '--ignore-tags=string'.
+
+# include_directories = string
+
+### Specify a comma-separated list of directories you wish to follow
+### when downloading-the same as '-I string'.
+
+# iri = on/off
+
+### When set to on, enable internationalized URI (IRI) support; the same
+### as '--iri'.
+
+# inet4_only = on/off
+inet4_only = on
+
+### Force connecting to IPv4 addresses, off by default. You can put this
+### in the global init file to disable Wget's attempts to resolve and
+### connect to IPv6 hosts. Available only if Wget was compiled with IPv6
+### support. The same as '--inet4-only' or '-4'.
+
+# inet6_only = on/off
+
+### Force connecting to IPv6 addresses, off by default. Available only
+### if Wget was compiled with IPv6 support. The same as '--inet6-only'
+### or '-6'.
+
+# input = file
+
+### Read the URLs from string, like '-i file'.
+
+# keep_session_cookies = on/off
+
+### When specified, causes 'save_cookies = on' to also save session
+### cookies. See '--keep-session-cookies'.
+
+# limit_rate = rate
+
+### Limit the download speed to no more than rate bytes per second. The
+### same as '--limit-rate=rate'.
+
+# load_cookies = file
+
+### Load cookies from file. See '--load-cookies file'.
+
+# local_encoding = encoding
+
+### Force Wget to use encoding as the default system encoding. See
+### '--local-encoding'.
+
+# logfile = file
+
+### Set logfile to file, the same as '-o file'.
+
+# max_redirect = number
+
+### Specifies the maximum number of redirections to follow for a
+### resource. See '--max-redirect=number'.
+
+# mirror = on/off
+
+### Turn mirroring on/off. The same as '-m'.
+
+# netrc = on/off
+
+### Turn reading netrc on or off.
+
+# no_clobber = on/off
+
+### Same as '-nc'.
+
+# no_parent = on/off
+no_parent = on
+
+### Disallow retrieving outside the directory hierarchy, like
+### '--no-parent' (see Directory-Based Limits
+### <#Directory_002dBased-Limits>).
+
+# no_proxy = string
+
+### Use string as the comma-separated list of domains to avoid in proxy
+### loading, instead of the one specified in environment.
+
+# output_document = file
+
+### Set the output filename-the same as '-O file'.
+
+# page_requisites = on/off
+
+### Download all ancillary documents necessary for a single HTML page to
+### display properly-the same as '-p'.
+
+# passive_ftp = on/off
+
+### Change setting of passive FTP, equivalent to the '--passive-ftp'
+### option.
+
+# password = string
+
+### Specify password string for both FTP and HTTP file retrieval. This
+### command can be overridden using the 'ftp_password' and
+### 'http_password' command for FTP and HTTP respectively.
+
+# post_data = string
+
+### Use POST as the method for all HTTP requests and send string in the
+### request body. The same as '--post-data=string'.
+
+# post_file = file
+
+### Use POST as the method for all HTTP requests and send the contents
+### of file in the request body. The same as '--post-file=file'.
+
+# prefer_family = none/IPv4/IPv6
+
+### When given a choice of several addresses, connect to the addresses
+### with specified address family first. The address order returned by
+### DNS is used without change by default. The same as
+### '--prefer-family', which see for a detailed discussion of why this
+### is useful.
+
+# private_key = file
+
+### Set the private key file to file. The same as '--private-key=file'.
+
+# private_key_type = string
+
+### Specify the type of the private key, legal values being 'PEM' (the
+### default) and 'DER' (aka ASN1). The same as '--private-type=string'.
+
+# progress = string
+progress = bar:noscroll
+
+### Set the type of the progress indicator. Legal types are 'dot' and
+### 'bar'. Equivalent to '--progress=string'.
+
+# protocol_directories = on/off
+
+### When set, use the protocol name as a directory component of local
+### file names. The same as '--protocol-directories'.
+
+# proxy_password = string
+
+### Set proxy authentication password to string, like
+### '--proxy-password=string'.
+
+# proxy_user = string
+
+### Set proxy authentication user name to string, like
+### '--proxy-user=string'.
+
+# quiet = on/off
+
+### Quiet mode-the same as '-q'.
+
+# quota = quota
+
+### Specify the download quota, which is useful to put in the global
+### wgetrc. When download quota is specified, Wget will stop retrieving
+### after the download sum has become greater than quota. The quota can
+### be specified in bytes (default), kbytes 'k' appended) or mbytes ('m'
+### appended). Thus 'quota = 5m' will set the quota to 5 megabytes. Note
+### that the user's startup file overrides system settings.
+
+# random_file = file
+
+### Use file as a source of randomness on systems lacking /dev/random.
+
+# random_wait = on/off
+
+### Turn random between-request wait times on or off. The same as
+### '--random-wait'.
+
+# read_timeout = n
+
+### Set the read (and write) timeout-the same as '--read-timeout=n'.
+
+# reclevel = n
+
+### Recursion level (depth)-the same as '-l n'.
+
+# recursive = on/off
+
+### Recursive on/off-the same as '-r'.
+
+# referer = string
+referer = /
+
+### Set HTTP 'Referer:' header just like '--referer=string'. (Note that
+### it was the folks who wrote the HTTP spec who got the spelling of
+### "referrer" wrong.)
+
+# relative_only = on/off
+
+### Follow only relative links-the same as '-L' (see Relative Links
+### <#Relative-Links>).
+
+# remote_encoding = encoding
+
+### Force Wget to use encoding as the default remote server encoding.
+### See '--remote-encoding'.
+
+# remove_listing = on/off
+
+### If set to on, remove FTP listings downloaded by Wget. Setting it to
+### off is the same as '--no-remove-listing'.
+
+# restrict_file_names = unix/windows
+
+### Restrict the file names generated by Wget from URLs. See
+### '--restrict-file-names' for a more detailed description.
+
+# retr_symlinks = on/off
+
+### When set to on, retrieve symbolic links as if they were plain files;
+### the same as '--retr-symlinks'.
+
+# retry_connrefused = on/off
+
+### When set to on, consider "connection refused" a transient error-the
+### same as '--retry-connrefused'.
+
+# robots = on/off
+
+# Ignore `robots.txt` and `<meta name=robots content=nofollow>`
+robots = off
+
+### Specify whether the norobots convention is respected by Wget, "on"
+### by default. This switch controls both the /robots.txt and the
+### 'nofollow' aspect of the spec. See Robot Exclusion
+### <#Robot-Exclusion>, for more details about this. Be sure you know
+### what you are doing before turning this off.
+
+# save_cookies = file
+
+### Save cookies to file. The same as '--save-cookies file'.
+
+# save_headers = on/off
+
+### Same as '--save-headers'.
+
+# secure_protocol = string
+
+### Choose the secure protocol to be used. Legal values are 'auto' (the
+### default), 'SSLv2', 'SSLv3', and 'TLSv1'. The same as
+### '--secure-protocol=string'.
+
+# server_response = on/off
+
+### Choose whether or not to print the HTTP and FTP server responses-the
+### same as '-S'.
+
+# show_all_dns_entries = on/off
+
+### When a DNS name is resolved, show all the IP addresses, not just the
+### first three.
+
+# span_hosts = on/off
+
+### Same as '-H'.
+
+# spider = on/off
+
+### Same as '--spider'.
+
+# strict_comments = on/off
+
+### Same as '--strict-comments'.
+
+# timeout = n
+
+# Wait 60 seconds before timing out. This applies to all timeouts:
+# DNS, connect and read. (The default read timeout is 15 minutes!)
+timeout = 60
+
+### Set all applicable timeout values to n, the same as '-T n'.
+
+# timestamping = on/off
+timestamping = on
+
+### Turn timestamping on/off. The same as '-N' (see Time-Stamping
+### <#Time_002dStamping>).
+
+# use_server_timestamps = on/off
+
+### If set to 'off', Wget won't set the local file's timestamp by the
+### one on the server (same as '--no-use-server-timestamps').
+
+# tries = n
+
+# Retry a few times when a download fails, but don't overdo it.
+# (The default is 20!)
+tries = 3
+
+### Set number of retries per URL-the same as '-t n'.
+
+# use_proxy = on/off
+use_proxy = off
+
+### When set to off, don't use proxy even when proxy-related environment
+### variables are set. In that case it is the same as using '--no-proxy'.
+
+# user = string
+
+### Specify username string for both FTP and HTTP file retrieval. This
+### command can be overridden using the 'ftp_user' and 'http_user'
+### command for FTP and HTTP respectively.
+
+# user_agent = string
+
+# Disguise as Firefox on NT
+user_agent = Mozilla/5.0 (Windows NT 5.1; rv:10.0.2) Gecko/20100101 Firefox/10.0.2
+
+### User agent identification sent to the HTTP Server-the same as
+### '--user-agent=string'.
+
+# verbose = on/off
+
+### Turn verbose on/off-the same as '-v'/'-nv'.
+
+# wait = n
+
+### Wait n seconds between retrievals-the same as '-w n'.
+
+# wait_retry = n
+
+### Wait up to n seconds between retries of failed retrievals only-the
+### same as '--waitretry=n'. Note that this is turned on by default in
+### the global wgetrc.