# https://www.gnu.org/software/wget/manual/wget.html#Startup-File # accept/reject = string ### Same as '-A'/'-R' (see Types of Files <#Types-of-Files>). # add_hostdir = on/off ### Enable/disable host-prefixed file names. '-nH' disables it. # ask_password = on/off ### Prompt for a password for each connection established. Cannot be ### specified when '--password' is being used, because they are mutually ### exclusive. Equivalent to '--ask-password'. # auth_no_challenge = on/off ### If this option is given, Wget will send Basic HTTP authentication ### information (plaintext username and password) for all requests. See ### '--auth-no-challenge'. # background = on/off ### Enable/disable going to background-the same as '-b' (which enables it). # backup_converted = on/off ### Enable/disable saving pre-converted files with the suffix ### '.orig'-the same as '-K' (which enables it). # backups = number ### Use up to number backups for a file. Backups are rotated by adding ### an incremental counter that starts at '1'. The default is '0'. # base = string ### Consider relative URLs in input files (specified via the 'input' ### command or the '--input-file'/'-i' option, together with ### 'force_html' or '--force-html') as being relative to string-the same ### as '--base=string'. # bind_address = address ### Bind to address, like the '--bind-address=address'. # ca_certificate = file ### Set the certificate authority bundle file to file. The same as ### '--ca-certificate=file'. # ca_directory = directory ### Set the directory used for certificate authorities. The same as ### '--ca-directory=directory'. # cache = on/off ### When set to off, disallow server-caching. See the '--no-cache' option. # certificate = file ### Set the client certificate file name to file. The same as ### '--certificate=file'. # certificate_type = string ### Specify the type of the client certificate, legal values being 'PEM' ### (the default) and 'DER' (aka ASN1). The same as ### '--certificate-type=string'. # check_certificate = on/off ### If this is set to off, the server certificate is not checked against ### the specified client authorities. The default is "on". The same as ### '--check-certificate'. # connect_timeout = n ### Set the connect timeout-the same as '--connect-timeout'. # content_disposition = on/off ### Turn on recognition of the (non-standard) 'Content-Disposition' HTTP ### header-if set to 'on', the same as '--content-disposition'. # trust_server_names = on/off trust_server_names = on ### If set to on, use the last component of a redirection URL for the ### local file name. # continue = on/off continue = on ### If set to on, force continuation of preexistent partially retrieved ### files. See '-c' before setting it. # convert_links = on/off convert_links = on ### Convert non-relative links locally. The same as '-k'. # cookies = on/off ### When set to off, disallow cookies. See the '--cookies' option. # cut_dirs = n ### Ignore n remote directory components. Equivalent to '--cut-dirs=n'. # debug = on/off ### Debug mode, same as '-d'. # default_page = string ### Default page name-the same as '--default-page=string'. # delete_after = on/off ### Delete after download-the same as '--delete-after'. # dir_prefix = string ### Top of directory tree-the same as '-P string'. # dirstruct = on/off ### Turning dirstruct on or off-the same as '-x' or '-nd', respectively. # dns_cache = on/off ### Turn DNS caching on/off. Since DNS caching is on by default, this ### option is normally used to turn it off and is equivalent to ### '--no-dns-cache'. # dns_timeout = n ### Set the DNS timeout-the same as '--dns-timeout'. # domains = string ### Same as '-D' (see Spanning Hosts <#Spanning-Hosts>). # dot_bytes = n ### Specify the number of bytes "contained" in a dot, as seen throughout ### the retrieval (1024 by default). You can postfix the value with 'k' ### or 'm', representing kilobytes and megabytes, respectively. With dot ### settings you can tailor the dot retrieval to suit your needs, or you ### can use the predefined /styles/ (see Download Options ### <#Download-Options>). # dot_spacing = n ### Specify the number of dots in a single cluster (10 by default). # dots_in_line = n ### Specify the number of dots that will be printed in each line ### throughout the retrieval (50 by default). # egd_file = file ### Use string as the EGD socket file name. The same as '--egd-file=file'. # exclude_directories = string ### Specify a comma-separated list of directories you wish to exclude ### from download-the same as '-X string' (see Directory-Based Limits ### <#Directory_002dBased-Limits>). # exclude_domains = string ### Same as '--exclude-domains=string' (see Spanning Hosts ### <#Spanning-Hosts>). # follow_ftp = on/off ### Follow FTP links from HTML documents-the same as '--follow-ftp'. # follow_tags = string ### Only follow certain HTML tags when doing a recursive retrieval, just ### like '--follow-tags=string'. # force_html = on/off ### If set to on, force the input filename to be regarded as an HTML ### document-the same as '-F'. # ftp_password = string ### Set your FTP password to string. Without this setting, the password ### defaults to '-wget@', which is a useful default for anonymous FTP ### access. ### This command used to be named |passwd| prior to Wget 1.10. # ftp_proxy = string ### Use string as FTP proxy, instead of the one specified in environment. # ftp_user = string ### Set FTP user to string. ### This command used to be named |login| prior to Wget 1.10. # glob = on/off ### Turn globbing on/off-the same as '--glob' and '--no-glob'. # header = string header = Accept: text/html,application/xhtml+xml,application/xml;q=0.8,*/*;q=0.5 header = Accept-Language: ru-ru,ru;q=0.8;en-us;q=0.6,en;q=0.4 header = Connection: keep-alive ### Define headers for HTTP downloads, like using '--header=string'. # adjust_extension = on/off ### Add a '.html' extension to 'text/html' or 'application/xhtml+xml' ### files that lack one, or a '.css' extension to 'text/css' files that ### lack one, like '-E'. Previously named 'html_extension' (still ### acceptable, but deprecated). # http_keep_alive = on/off ### Turn the keep-alive feature on or off (defaults to on). Turning it ### off is equivalent to '--no-http-keep-alive'. # http_password = string ### Set HTTP password, equivalent to '--http-password=string'. # http_proxy = string ### Use string as HTTP proxy, instead of the one specified in environment. # http_user = string ### Set HTTP user to string, equivalent to '--http-user=string'. # https_only = on/off ### When in recursive mode, only HTTPS links are followed (defaults to ### off). # https_proxy = string ### Use string as HTTPS proxy, instead of the one specified in environment. # ignore_case = on/off ### When set to on, match files and directories case insensitively; the ### same as '--ignore-case'. # ignore_length = on/off ### When set to on, ignore |Content-Length| header; the same as ### '--ignore-length'. # ignore_tags = string ### Ignore certain HTML tags when doing a recursive retrieval, like ### '--ignore-tags=string'. # include_directories = string ### Specify a comma-separated list of directories you wish to follow ### when downloading-the same as '-I string'. # iri = on/off ### When set to on, enable internationalized URI (IRI) support; the same ### as '--iri'. # inet4_only = on/off inet4_only = on ### Force connecting to IPv4 addresses, off by default. You can put this ### in the global init file to disable Wget's attempts to resolve and ### connect to IPv6 hosts. Available only if Wget was compiled with IPv6 ### support. The same as '--inet4-only' or '-4'. # inet6_only = on/off ### Force connecting to IPv6 addresses, off by default. Available only ### if Wget was compiled with IPv6 support. The same as '--inet6-only' ### or '-6'. # input = file ### Read the URLs from string, like '-i file'. # keep_session_cookies = on/off ### When specified, causes 'save_cookies = on' to also save session ### cookies. See '--keep-session-cookies'. # limit_rate = rate ### Limit the download speed to no more than rate bytes per second. The ### same as '--limit-rate=rate'. # load_cookies = file ### Load cookies from file. See '--load-cookies file'. # local_encoding = encoding ### Force Wget to use encoding as the default system encoding. See ### '--local-encoding'. # logfile = file ### Set logfile to file, the same as '-o file'. # max_redirect = number ### Specifies the maximum number of redirections to follow for a ### resource. See '--max-redirect=number'. # mirror = on/off ### Turn mirroring on/off. The same as '-m'. # netrc = on/off ### Turn reading netrc on or off. # no_clobber = on/off ### Same as '-nc'. # no_parent = on/off no_parent = on ### Disallow retrieving outside the directory hierarchy, like ### '--no-parent' (see Directory-Based Limits ### <#Directory_002dBased-Limits>). # no_proxy = string ### Use string as the comma-separated list of domains to avoid in proxy ### loading, instead of the one specified in environment. # output_document = file ### Set the output filename-the same as '-O file'. # page_requisites = on/off ### Download all ancillary documents necessary for a single HTML page to ### display properly-the same as '-p'. # passive_ftp = on/off ### Change setting of passive FTP, equivalent to the '--passive-ftp' ### option. # password = string ### Specify password string for both FTP and HTTP file retrieval. This ### command can be overridden using the 'ftp_password' and ### 'http_password' command for FTP and HTTP respectively. # post_data = string ### Use POST as the method for all HTTP requests and send string in the ### request body. The same as '--post-data=string'. # post_file = file ### Use POST as the method for all HTTP requests and send the contents ### of file in the request body. The same as '--post-file=file'. # prefer_family = none/IPv4/IPv6 ### When given a choice of several addresses, connect to the addresses ### with specified address family first. The address order returned by ### DNS is used without change by default. The same as ### '--prefer-family', which see for a detailed discussion of why this ### is useful. # private_key = file ### Set the private key file to file. The same as '--private-key=file'. # private_key_type = string ### Specify the type of the private key, legal values being 'PEM' (the ### default) and 'DER' (aka ASN1). The same as '--private-type=string'. # progress = string progress = bar:noscroll ### Set the type of the progress indicator. Legal types are 'dot' and ### 'bar'. Equivalent to '--progress=string'. # protocol_directories = on/off ### When set, use the protocol name as a directory component of local ### file names. The same as '--protocol-directories'. # proxy_password = string ### Set proxy authentication password to string, like ### '--proxy-password=string'. # proxy_user = string ### Set proxy authentication user name to string, like ### '--proxy-user=string'. # quiet = on/off ### Quiet mode-the same as '-q'. # quota = quota ### Specify the download quota, which is useful to put in the global ### wgetrc. When download quota is specified, Wget will stop retrieving ### after the download sum has become greater than quota. The quota can ### be specified in bytes (default), kbytes 'k' appended) or mbytes ('m' ### appended). Thus 'quota = 5m' will set the quota to 5 megabytes. Note ### that the user's startup file overrides system settings. # random_file = file ### Use file as a source of randomness on systems lacking /dev/random. # random_wait = on/off ### Turn random between-request wait times on or off. The same as ### '--random-wait'. # read_timeout = n ### Set the read (and write) timeout-the same as '--read-timeout=n'. # reclevel = n ### Recursion level (depth)-the same as '-l n'. # recursive = on/off ### Recursive on/off-the same as '-r'. # referer = string referer = / ### Set HTTP 'Referer:' header just like '--referer=string'. (Note that ### it was the folks who wrote the HTTP spec who got the spelling of ### "referrer" wrong.) # relative_only = on/off ### Follow only relative links-the same as '-L' (see Relative Links ### <#Relative-Links>). # remote_encoding = encoding ### Force Wget to use encoding as the default remote server encoding. ### See '--remote-encoding'. # remove_listing = on/off ### If set to on, remove FTP listings downloaded by Wget. Setting it to ### off is the same as '--no-remove-listing'. # restrict_file_names = unix/windows ### Restrict the file names generated by Wget from URLs. See ### '--restrict-file-names' for a more detailed description. # retr_symlinks = on/off ### When set to on, retrieve symbolic links as if they were plain files; ### the same as '--retr-symlinks'. # retry_connrefused = on/off ### When set to on, consider "connection refused" a transient error-the ### same as '--retry-connrefused'. # robots = on/off # Ignore `robots.txt` and `` robots = off ### Specify whether the norobots convention is respected by Wget, "on" ### by default. This switch controls both the /robots.txt and the ### 'nofollow' aspect of the spec. See Robot Exclusion ### <#Robot-Exclusion>, for more details about this. Be sure you know ### what you are doing before turning this off. # save_cookies = file ### Save cookies to file. The same as '--save-cookies file'. # save_headers = on/off ### Same as '--save-headers'. # secure_protocol = string ### Choose the secure protocol to be used. Legal values are 'auto' (the ### default), 'SSLv2', 'SSLv3', and 'TLSv1'. The same as ### '--secure-protocol=string'. # server_response = on/off ### Choose whether or not to print the HTTP and FTP server responses-the ### same as '-S'. # show_all_dns_entries = on/off ### When a DNS name is resolved, show all the IP addresses, not just the ### first three. # span_hosts = on/off ### Same as '-H'. # spider = on/off ### Same as '--spider'. # strict_comments = on/off ### Same as '--strict-comments'. # timeout = n # Wait 60 seconds before timing out. This applies to all timeouts: # DNS, connect and read. (The default read timeout is 15 minutes!) timeout = 60 ### Set all applicable timeout values to n, the same as '-T n'. # timestamping = on/off timestamping = on ### Turn timestamping on/off. The same as '-N' (see Time-Stamping ### <#Time_002dStamping>). # use_server_timestamps = on/off ### If set to 'off', Wget won't set the local file's timestamp by the ### one on the server (same as '--no-use-server-timestamps'). # tries = n # Retry a few times when a download fails, but don't overdo it. # (The default is 20!) tries = 3 ### Set number of retries per URL-the same as '-t n'. # use_proxy = on/off use_proxy = off ### When set to off, don't use proxy even when proxy-related environment ### variables are set. In that case it is the same as using '--no-proxy'. # user = string ### Specify username string for both FTP and HTTP file retrieval. This ### command can be overridden using the 'ftp_user' and 'http_user' ### command for FTP and HTTP respectively. # user_agent = string # Disguise as Firefox on NT user_agent = Mozilla/5.0 (Windows NT 5.1; rv:10.0.2) Gecko/20100101 Firefox/10.0.2 ### User agent identification sent to the HTTP Server-the same as ### '--user-agent=string'. # verbose = on/off ### Turn verbose on/off-the same as '-v'/'-nv'. # wait = n ### Wait n seconds between retrievals-the same as '-w n'. # wait_retry = n ### Wait up to n seconds between retries of failed retrievals only-the ### same as '--waitretry=n'. Note that this is turned on by default in ### the global wgetrc.