+or shared repository.
+
+
+Undo
+====
+
+Whatever you do, don't panic. Almost anything in git can be undone.
+
+git checkout: restore file's content
+------------------------------------
+
+``git checkout``, for example, can be used to restore the content of
+file(s) to that one of a commit. Like this::
+
+ git checkout HEAD~ README
+
+The commands restores the contents of README file to the last but one
+commit in the current branch. By default the commit ID is simply HEAD;
+i.e. ``git checkout README`` restores README to the latest commit.
+
+(Do not use ``git checkout`` to view a content of a file in a commit,
+use ``git cat-file -p``; e.g. ``git cat-file -p HEAD~:path/to/README``).
+
+git reset: remove (non-pushed) commits
+--------------------------------------
+
+``git reset`` moves the head of the current branch. The head can be
+moved to point to any commit but it's often used to remove a commit or
+a few (preferably, non-pushed ones) from the top of the branch - that
+is, to move the branch backward in order to undo a few (non-pushed)
+commits.
+
+``git reset`` has three modes of operation - soft, hard and mixed.
+Default is mixed. ProGit `explains
+<https://git-scm.com/book/en/Git-Tools-Reset-Demystified>`_ the
+difference very clearly. Bare repositories don't have indices or
+working trees so in a bare repo only soft reset is possible.
+
+Unstaging
+'''''''''
+
+Mixed mode reset with a path or paths can be used to unstage changes -
+that is, to remove from index changes added with ``git add`` for
+committing. See `The Book
+<https://git-scm.com/book/en/Git-Basics-Undoing-Things>`_ for details
+about unstaging and other undo tricks.
+
+git reflog: reference log
+-------------------------
+
+Removing commits with ``git reset`` or moving the head of a branch
+sounds dangerous and it is. But there is a way to undo: another
+reset back to the original commit. Git doesn't remove commits
+immediately; unreferenced commits (in git terminology they are called
+"dangling commits") stay in the database for some time (default is two
+weeks) so you can reset back to it or create a new branch pointing to
+the original commit.
+
+For every move of a branch's head - with ``git commit``, ``git
+checkout``, ``git fetch``, ``git pull``, ``git rebase``, ``git reset``
+and so on - git stores a reference log (reflog for short). For every
+move git stores where the head was. Command ``git reflog`` can be used
+to view (and manipulate) the log.
+
+In addition to the moves of the head of every branch git stores the
+moves of the HEAD - a symbolic reference that (usually) names the
+current branch. HEAD is changed with ``git checkout $BRANCH``.
+
+By default ``git reflog`` shows the moves of the HEAD, i.e. the
+command is equivalent to ``git reflog HEAD``. To show the moves of the
+head of a branch use the command ``git reflog $BRANCH``.
+
+So to undo a ``git reset`` lookup the original commit in ``git
+reflog``, verify it with ``git show`` or ``git log`` and run ``git
+reset $COMMIT_ID``. Git stores the move of the branch's head in
+reflog, so you can undo that undo later again.
+
+In a more complex situation you'd want to move some commits along with
+resetting the head of the branch. Cherry-pick them to the new branch.
+For example, if you want to reset the branch ``v2`` back to the
+original commit but preserve two commits created in the current branch
+do something like::
+
+ $ git branch save-v2 # create a new branch saving v2
+ $ git reflog # find the original place of v2
+ $ git reset $COMMIT_ID
+ $ git cherry-pick save-v2~ save-v2
+ $ git branch -D save-v2 # remove temporary branch
+
+git revert: revert a commit
+---------------------------
+
+``git revert`` reverts a commit or commits, that is, it creates a new
+commit or commits that revert(s) the effects of the given commits.
+It's the only way to undo published commits (``git commit --amend``,
+``git rebase`` and ``git reset`` change the branch in
+non-fast-forwardable ways so they should only be used for non-pushed
+commits.)
+
+There is a problem with reverting a merge commit. ``git revert`` can
+undo the code created by the merge commit but it cannot undo the fact
+of merge. See the discussion `How to revert a faulty merge
+<https://www.kernel.org/pub/software/scm/git/docs/howto/revert-a-faulty-merge.html>`_.
+
+One thing that cannot be undone
+-------------------------------
+
+Whatever you undo, there is one thing that cannot be undone -
+overwritten uncommitted changes. Uncommitted changes don't belong to
+git so git cannot help preserving them.
+
+Most of the time git warns you when you're going to execute a command
+that overwrites uncommitted changes. Git warns you when you try to
+switch branches with ``git checkout``. It warns you when you're going
+to rebase with non-clean working tree. It refuses to pull new commits
+over non-committed files.
+
+But there are commands that do exactly that - overwrite files in the
+working tree. Commands like ``git checkout $PATHs`` or ``git reset
+--hard`` silently overwrite files including your uncommitted changes.
+
+With that in mind you can understand the stance "commit early, commit
+often". Commit as often as possible. Commit on every save in your
+editor or IDE. You can edit your commits before pushing - change,
+reorder, combine, remove. But save your changes in git database,
+either commit changes or at least stash them with ``git stash``.
+
+
+Merge or rebase?
+================
+
+Internet is full of heated discussions on the topic: "merge or
+rebase?" Most of them are meaningless. When a DVCS is being used in a
+big team with a big and complex project with many branches there is
+simply no way to avoid merges. So the question's diminished to
+"whether to use rebase, and if yes - when to use rebase?" Considering
+that it is very much recommended not to rebase published commits the
+question's diminished even further: "whether to use rebase on
+non-pushed commits?"
+
+That small question is for the team to decide. The author of the PEP
+recommends to use rebase when pulling, i.e. always do ``git pull
+--rebase`` or even configure automatic setup of rebase for every new
+branch::
+
+ $ git config branch.autosetuprebase always
+
+and configure rebase for existing branches::
+
+ $ git config branch.$NAME.rebase true
+
+For example::
+
+ $ git config branch.v1.rebase true
+ $ git config branch.v2.rebase true
+
+After that ``git pull origin v2`` becomes equivalent to ``git pull
+--rebase origin v2``.
+
+In case when merge is preferred it is recommended to create new
+commits in a separate feature or topic branch while using rebase to
+update the mainline branch. When the topic branch is ready merge it
+into mainline. To avoid a tedious task of resolving large number of
+conflicts at once you can merge the topic branch to the mainline from
+time to time and switch back to the topic branch to continue working
+on it. The entire workflow would be something like::
+
+ $ git checkout -b issue-42 # create a new issue branch and switch to it
+ ...edit/test/commit...
+ $ git checkout v2
+ $ git pull --rebase origin v2 # update v2 from the upstream
+ $ git merge issue-42
+ $ git branch -d issue-42 # delete the topic branch
+ $ git push origin v2
+
+When the topic branch is deleted only the label is removed, commits
+are stayed in the database, they are now merged into v2::
+
+ o--o--o--o--o--M--< v2 - the mainline branch
+ \ /
+ --*--*--* - the topic branch, now unnamed
+
+The topic branch is deleted to avoid cluttering branch namespace with
+small topic branches. Information on what issue was fixed or what
+feature was implemented should be in the commit messages.
+
+
+Null-merges
+===========
+
+Git has a builtin merge strategy for what Python core developers call
+"null-merge"::
+
+ $ git merge -s ours v1 # null-merge v1 into v2
+
+
+Advanced configuration
+======================
+
+Line endings
+------------
+
+Git has builtin mechanisms to handle line endings between platforms
+with different EOL styles. To allow git to do CRLF conversion assign
+``text`` attribute to files using `.gitattributes
+<https://www.kernel.org/pub/software/scm/git/docs/gitattributes.html>`_.
+For files that have to have specific line ending assign ``eol``
+attribute. For binary files the attribute is, naturally, ``binary``.
+
+For example::
+
+ $ cat .gitattributes
+ *.py text
+ *.txt text
+ *.png binary
+ /readme.txt eol=CRLF
+
+To check what attributes git uses for files use ``git check-attr``
+command.
+
+
+Advanced topics
+===============
+
+Staging area
+------------
+
+Staging area aka index is a distinguishing feature of git. See
+`WhatIsTheIndex
+<https://git.wiki.kernel.org/index.php/WhatIsTheIndex>`_ and
+`IndexCommandQuickref
+<https://git.wiki.kernel.org/index.php/IndexCommandQuickref>`_ in Git
+Wiki.
+
+
+ReReRe
+======
+
+https://git-scm.com/book/en/Git-Tools-Rerere
+
+
+Database maintenance
+====================
+
+TODO: dangling objects, git gc, git repack.
+
+https://gcc.gnu.org/ml/gcc/2007-12/msg00165.html
+
+http://vcscompare.blogspot.ru/2008/06/git-repack-parameters.html
+
+
+Tips and tricks
+===============
+
+TODO: sticky options; example: git grep -O.
+
+TODO: tricky options; example: git log -p3.
+
+TODO: bash/zsh completion, bash/zsh prompt.
+https://git.kernel.org/cgit/git/git.git/tree/contrib/completion
+
+
+git on server
+=============
+
+TODO: anonymous access; git over ssh; gitolite; gitweb; cgit; gitlab.
+
+http://gitolite.com/gitolite/index.html
+
+https://git.kernel.org/cgit/git/git.git/tree/gitweb
+
+http://git.zx2c4.com/cgit/
+
+From Mercurial to git
+=====================
+
+Mercurial for Git users https://mercurial.selenic.com/wiki/GitConcepts
+
+https://github.com/felipec/git-remote-hg
+
+https://hg-git.github.io/