Feat(RedHat): Add RedHat and redhatoids playbooks and roles

[ansible.git] / playbooks / redhat / roles / firewall / files / etc / rc.d / init.d / rc.masq

diff --git a/playbooks/redhat/roles/firewall/files/etc/rc.d/init.d/rc.masq b/playbooks/redhat/roles/firewall/files/etc/rc.d/init.d/rc.masq
new file mode 100755 (executable)
index 0000000..69be427
--- /dev/null
+++ b/playbooks/redhat/roles/firewall/files/etc/rc.d/init.d/rc.masq
@@ -0,0 +1,92 @@
+#!/bin/sh
+#
+# rc.masq - IP Masquerade
+#
+# Load all required IP MASQ modules
+#
+#   NOTE:  Only load the IP MASQ modules you need.  All current IP MASQ modules
+#          are shown below but are commented out from loading.
+
+# Needed to initially load modules
+#
+#/sbin/depmod -a
+
+# Supports the proper masquerading of FTP file transfers using the PORT method
+#
+#/sbin/modprobe ip_masq_ftp
+
+# Supports the masquerading of RealAudio over UDP.  Without this module,
+#       RealAudio WILL function but in TCP mode.  This can cause a reduction
+#       in sound quality
+#
+#/sbin/modprobe ip_masq_raudio
+
+# Supports the masquerading of IRC DCC file transfers
+#
+#/sbin/modprobe ip_masq_irc
+
+
+# Supports the masquerading of Quake and QuakeWorld by default.  This modules is
+#   for for multiple users behind the Linux MASQ server.  If you are going to play
+#   Quake I, II, and III, use the second example.
+#
+#   NOTE:  If you get ERRORs loading the QUAKE module, you are running an old
+#   -----  kernel that has bugs in it.  Please upgrade to the newest kernel.
+#
+#Quake I / QuakeWorld (ports 26000 and 27000)
+#/sbin/modprobe ip_masq_quake
+#
+#Quake I/II/III / QuakeWorld (ports 26000, 27000, 27910, 27960)
+#/sbin/modprobe ip_masq_quake 26000,27000,27910,27960
+
+
+# Supports the masquerading of the CuSeeme video conferencing software
+#
+#/sbin/modprobe ip_masq_cuseeme
+
+#Supports the masquerading of the VDO-live video conferencing software
+#
+#/sbin/modprobe ip_masq_vdolive
+
+
+#CRITICAL:  Enable IP forwarding since it is disabled by default since
+#
+#           Redhat Users:  you may try changing the options in /etc/sysconfig/network from:
+#
+#                       FORWARD_IPV4=false
+#                             to
+#                       FORWARD_IPV4=true
+#
+echo 1 > /proc/sys/net/ipv4/ip_forward
+
+
+# Dynamic IP users:
+#
+#   If you get your IP address dynamically from SLIP, PPP, or DHCP, enable this following
+#       option.  This enables dynamic-ip address hacking in IP MASQ, making the life
+#       with Diald and similar programs much easier.
+#
+#echo "1" > /proc/sys/net/ipv4/ip_dynaddr
+
+
+IPTABLES=/sbin/iptables
+
+
+# DHCP:  For people who receive their external IP address from either DHCP or BOOTP
+#        such as ADSL or Cablemodem users, it is necessary to use the following
+#        before the deny command.  The "bootp_client_net_if_name" should be replaced
+#        the name of the link that the DHCP/BOOTP server will put an address on to?
+#        This will be something like "eth0", "eth1", etc.
+#
+#        This example is currently commented out.
+#
+#
+#$IPCHAINS -A input -j ACCEPT -i bootp_clients_net_if_name -s 0/0 67 -d 0/0 68 -p udp
+
+# Enable simple IP forwarding and Masquerading
+#
+#  NOTE:  The following is an example for an internal LAN address in the 192.168.0.x
+#         network with a 255.255.255.0 or a "24" bit subnet mask.
+#
+#         Please change this network number and subnet mask to match your internal LAN setup
+#